How to Disconnect and Install a Car Battery

Are you stuck with a dead battery in San Bruno? While it can be frustrating, it only requires a simple fix! While we can help you replace a car battery, you can also do it yourself! It can be an easy install that does not require extensive expertise. View the step-by-step instructions delivered by the Victory Honda of San Bruno service center below. 

How to Replace a Car Battery Correctly

Disconnect the Old Battery

• Make sure the car is in park, the ignition is turned off, and the parking brake is engaged.
• Find your battery. It’s usually in the front of the engine compartment, along either side.
• Detach the negative (-) cable from the battery before removing the negative cable. Do not allow the wrench to touch both the negative and positive terminals at the same time.
• Detach the positive (+) cable from the battery after the negative cable is completely disconnected.
• Some cars have a bracket or something else holding the battery in place. Remove the bracket to gain full access to the battery. .
• Remove the old battery, but don’t throw it away! Batteries must be recycled. If you take it to the retailer where you bought the new battery, you can get a refund on your core charge.

Installing the New Battery

• Inspect the connectors on the ends of the positive and negative cables for corrosion. Clean it with a wire brush.
• Set the new battery in place and reattach the bracket.
• Connect the positive (+) cable first.
• Connect the negative (-) cable second. Make sure to connect the cables in this specific order (positive first, then negative) to avoid a short or electrical shock. 
• Turn on the engine to test.

Schedule Battery Service Today at Victory Honda of San Bruno

Do you need assistance when it comes to your battery? You may know how to disconnect and install a battery, but that doesn’t mean you have to do it yourself! An expert can assist you in making sure you can get back on the road in Hayword in no time. Schedule your service appointment today!